CHIEF Technologies | USA | Elevating Safety Through Innovation

CF-100

Alarm Check Valves

Valve must be installed in vertical position with the trim as shown. Any deviation may affect the proper operation of the valve.
Standard flange designed to EN1092- 2 PN10/ 16, ANSI B16. 1 Class 125.
UL listed.
FM Approved (sizes through 6” / 150mm)

CF-200

OS&Y GATE VALVES

Meet or exceed the requirements of AWWA C515 standard.
Full waterway.
Adjustable packing.
Rubber fully
encapsulated ductile iron wedge.
Handwheel – open left or open right.
Face to face dimension complies with ASME
B16.10 and EN558 series 3.
Flange and drilling comply with ASTM B16.1 Class 125.
UL listed, FM 1120/1130 approved
Certificated to ANSI/NSF 61 & 372.

CF-300

NRS GATE VALVEs

Meet or exceed the requirements of AWWA C515 standard.
Full waterway.
2″ Square Operating Nut.
Rubber fully encapsulated ductile iron wedge.
Triple O-Ring stem seal.
Face to face dimension complies with ASME B16.10 and EN558 series 3.
Flange and drilling comply with AST M B16.1 Class 125.
UL listed, FM 1120/1130 approved
Certificated to ANSI/NSF 61 & 372.

CF-400

SWING CHECK VALVEs

Meet or exceed the requirements of AWWA C508 standard.
Gravity operated, swing check design.
Inspection or replacement of all parts without removing the valve from the line.
Bosses on both sides of the body for connecting by-passes if required.
Superior design featuring exceptionally low-pressure losses at high flow rates.
Rubber Disc Facing and Bronze Seat Ring.
Flanged connections are drilled per ASME Bl6.l Class 125.

cfa40 & cfa65

Angle hose VALVEs

Meet or exceed the requirements of NFPA 24 standard.
Body Material CAC203.
UL listed, FM approved.

CF BFV G 300

Grooved Butterfly Valves

Vulcanized Disc Design for Bubble-Tight Shut off.
Outdoor and Indoor rated.
Flag Type Position Indicator.
Built-in Supervisory Switch.
Grooved Ends Dimensions meet AWWA C606 Standard or other IPS Pipe.
Face to Face Dimension complies with MS SP-67.
UL 1091 Listed, FM 1112 Approved,Certified.

CF-ARV-22

Air Release Valve

Small orifice releases air under pressure during normal pipeline operation.
The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipeline pressure.
Rated Working Pressure 300 psi.
UL Listed, FM 1344 Approved.

CF-1100

TEST & DRAIN VALVE

Test and Drain allows for draining of a sprinkler system as well as performing the required Water Flow Test with one combined valve incorporating a single handle. The CF-1100 eliminates the need to utilize two separate valves and additional fittings to perform the test and drain functions. These features of the Model CF-1100 reduce the need for additional Test and Drain Valve inventory with multiple test orifices. The Model CF-1100 contains two integrated ports with clear Lexan plugs allowing for a visual means to determine if water is flowing through the valve.